CONELOG ® TITANIUM BASE CAD/CAM CONELOG ® TITANIUM BASE CAD/CAM The Titanium base CAD/CAM enables restorations with individual, two-part abutments made from suitable materials on SCREW-LINE implants. It is available in two gingival heights (0.8 and 2 mm) and is used as a bonding base for individual implant-supported reconstructions such as mesostructu- res and superstructures. For simplification of the process flow, a dark purple anodized abutment screw and a bonding aid are included in each packaging. To extend their scope of use, the geometries of the new Titanium bases CAD/ CAM, the modelling aids, the abutment and lab screws have been adapted to accommodate the Sirona inCoris ZI meso blocks. ALL BENEFITS AT A GLANCE • Implant-abutment connection with tapered inner geometry for a precise, stable and antirotational connection • Available in two gingival heights for optimal adaptation to the vertical implant position and the emergence profile • Large bonding surface for high stability and reliable adhesion of the bonding • Bonding aid and abutment screw for Titanium base CAD/CAM included • Unambiguous and fast positioning of the Titanium base CAD/CAM thanks to the precise abutment guidance in the implant • Easy removal of the Titanium base CAD/CAM from the implant with the disconnector • Integrated in the Sirona work process (can be used with the inCoris meso blocks) TITANIUM BASE CAD/CAM SAFE CONNECTION BETWEEN IMPLANT AND INDIVIDUALLY CAD/CAM-FABRICATED PROSTHETIC RESTORATION CONELOG ® MODELING AID The modeling aid helps simplify the fabrication of mesostructures and crown frameworks on the Titanium base CAD/CAM and comes color-coded for im- plant diameters 3.3/3.8/4.3/5.0 mm. The modeling aid burns residue-free and can be individually shortened. PROCESSING OPTIONS Direct scanning of a wax-up fabricated on a modeling aid. Alternatively, the wax-up can be cast into a framework using the casting technique or pressed into a framework using the pressing technique. ALL BENEFITS AT A GLANCE • Simple fabrication of a wax-up for scanning or a casted, respectively pressed, prosthetic restoration • Inner configuration provides the optimal bonding space to the titanium base for the casting and pressing technique • Extended design of the cervical edge enables good modeling • Retention indentations for good adhesion of the modeling material • Self-retaining on the titanium base Retention indentations for good adhesion of the modeling material Extended cervical edge Gingival height 2.0mm Prosthetic height 6.7 mm Antirotational protection for the prosthetic restoration 11.0mm 4.7mm Visualization of the rotational protection Gingival height 0.8mm 4.7mm Prosthetic height 5.5 mm