CAMLOG Vario SR Prosthetics Components

CAMLOG ® VARIO SR PROSTHETIC COMPONENTS HYBRID PROSTHETICS LASER-WELDED BAR CONSTRUCTIONS VARIO SR BASES FOR BAR Vario SR bases for bar are made out of grade 4 titanium and are suitable for laser-welded bar constructions with prefabricated bar elements made out of identical material. The copings do not have an antirotational mechanism and are each available in the 3.8/4.3 mm and 5.0/6.0 mm diameters. NOTE Vario SR bases for bar have no antirotational mechanism and therefore are only suited for bar constructions. TASKS OF A BAR RESTORATION In implantological hybrid prosthetics, bar restorations represent stable im- plant-connecting constructions; a hybrid prosthesis can be securely an- chored. • Protecting the prosthesis against shearing and lifting forces • Shear distribution • Stabilization and primary splinting of the implants • Resilience compensation through degrees of freedom FABRICATING A BAR CONSTRUCTION To fabricate a bar construction, Vario SR bases for bar are set on the Vario SR analogs. A screwdriver (hex) is used to screw in the Vario SR prosthetic screw hand-tight. VARIO SR BASES FOR BAR FOR BAR CONSTRUCTIONS ON STRAIGHT AND ANGLED CAMLOG ® VARIO SR ABUTMENTS ART. NO. ARTICLE FOR IMPLANT DIAMETERS J2570.4300 J2570.6000 J4005.2004 3.8/4.3 mm 5.0/6.0 mm Vario SR base for bar, laser-weldable, incl. Vario SR prosthetic screw Vario SR base for bar, laser-weldable, incl. Vario SR prosthetic screw Vario SR prosthetic screw, hex, M 2.0, yellow anodized Vario SR base for bar with Vario SR prosthetic screw Height 6.0 mm